Distributorship & State Representative Program

BEST OPPORTUNITY , BY SOMETHING BETTER COMPANY

"INSULATION STONE"

(Up to R-50 Achievable)

A 2 FOR 1 VALUE FOR YOUR CUSTOMERS! CALL TODAY FOR MORE INFO ON THE NEW SBC PRODUCT "INSULATION STONE"

FOR ALL interested and have been considering becoming a distributor or State Rep. selling the SBC Concrete Wall Panels...

There is a Master Plan which will launch even bigger profits for all who get on board to this winning and beyond competitive partnership, and we need the Right People On Board!.  There will be many other worthwhile turn key spin off's that go hand in hand with the mass production of High End Panels such as 2 piece molds for our best selling sinks, 2 piece molds for Large Oval Tub- starting at $9,500 if selling with real Copper Plating, you will also be able to make and sell High End Water Wall Kits For $1,000 arched consisting of 3 veneer stone panels. "Busyness is not always Effectiveness"and we are excited to have the right people on board who will be freed up in time and able to move forward with us a we all fine tune the worthwileness of High End Factory Mode and also look forward in helping to turn you into a strategic thinking partner by helping you "Automate" your business and free you up to think clearly. "It's amazing how much clearer ideas and plans become when we are freed up to think!"   Bryan G.

Make sure to WATCH THE VIDEOS ABOVE AND READ THE DETAIL BELOW, THEN Call today for EVEN MORE detail.

THERE'S New Efficiencies, 1 Hour Set Times for panels, manufacturer 120 panels a day, doing 2 batches with 60 molds or 240 a day doing 4 batches. 120 panels a day is comfortably, $10,000 daily profits!  JOIN THE TEAM & THE VISION. VERY LOW INVESTMENT & VERY HIGH RETURNS---NOT---A Sales Pitch! HOWEVER, there IS WORK involved on your end and you will be responsible for martketing the Panels in your Territory. Call Bryan for more details and keep watch on the betterpaths.com website for continuous updates.

 

CLICK IMAGE TO ENLARGECLICK IMAGE TO ENLARGE

2012 TRAINING DATES

FEBRUARY 23RD & 24TH, 2012

APRIL 26TH & 27TH, 2012

JUNE 28TH & 29TH, 2012

SEPTEMBER 27TH & 28TH, 2012

NOVEMBER 15TH & 16TH, 2012

SAVE YOUR SPOT, LIMITED SPACE AVAILABLE

CALL 800-324-1719 EXT. 202

 See if your DESIRED TERRITORY is still available 

 If finances are the barrier to you getting involved in the panel program,

In-House Payment Arrangements are available and after your deposit, payment amounts are decided by YOU!

SIDING FOR INTERIOR & EXTERIOR WALLS

WALL SIDING SYSTEM IS PERFECT FOR BOTH FOR COMMERCIAL AND RESIDENTIAL PROJECTS.

A lightweight concrete wall panel with unique designs allowing for custom appeal

 

Patterns Include: 6 different Ashler Slate Molds (Small & Large), Random River Rock Mold, Diamond Tile Mold and The First Mold You Receive in Your Package "Veneer Stone" Mold also know as Stack Stone and Culture Stone. 4 Designs - 9 Molds Total. Images Below are a small sample of the patterns. More Images Coming Very Soon!

Below image shows & emphasizes how perfect the corners turn out! NO need for extra steps with corner molding! Enlarge the image to see how seamless the corners are!

ENLARGE IMAGE

 

CLICK TO ENLARGE

Bryan the class was awesome and like you I really admired the tenacity and great stories of Don Hansen. He is one of those guys that has lots to share with everyone and I look forward to staying in touch with him. The panels are awesome and what amazed me most was the ease in which we put them up. The tight joints could literally get by with out any mortar. Thanks again for everything. KIP MORRIS

CLICK TO ENLARGE

"Bryan the class on carpentry panels was the best I have ever attended. You went thru great detail on all the steps which will make it easier to make my own panels. I appreciate all you and Tammi did for me and the rest of the class. It is always great to attend a class with students like Kip Morris, B T Heitzman and Scott Metzger. Everyone really put their all into this project so everyone got more out of it. I can't get over how great the panels look and how fast they went up. I had no idea they could be colored so easy. I already have place to put some panels as soon as I make them. Thanks for a FABULOUS CLASS and thank Tammi for the great launches. I will be in touch soon." DON HANSEN

CLICK TO ENLARGE IMAGE

2012 TRAINING DATES

FEBRUARY 23RD & 24TH, 2012

APRIL 26TH & 27TH, 2012

JUNE 28TH & 29TH, 2012

SEPTEMBER 27TH & 28TH, 2012

NOVEMBER 15TH & 16TH, 2012

Is Your TERRITORY Available

Secure Your Business Opportunity Now!

Financing is available through SBC directly, there is no 3 Party Financing Entity involved. All arrangements for financing are on a student by student basis. To set up your financing please call Tammi Gauthier ext. 202.

BRYAN - 602-741-8322

US. 800- 324-1719 (Bryan ext. 201)

 

 

 

 

 

 

 

MORE TRAINING

Student Testimonies

Check Out The Rest Of Our GREAT Decorative Concrete Training Classes

Advanced Colorations

Method of Concrete Countertops

Methods of Decorative Concrete Overlays

Methods of Rock Making & Water Features

Methods of Making Weeping Water Walls

Kitchen Cabinets Refacing

Methods of Making Concrete Trees

AND BEST OF ALL!

OUR DECORATIVE CONCRETE TRAINING PRO COURSE &

OUR DECORATIVE CONCRETE TRAINING STARTER COURSE

SKIP TO DETAIL BELOW!

"Franchise Like" Investment! WITHOUT the Franchise fees and restrictions!

 

2 Opportunities

1. BECOME A DISTRIBUTOR SELLING THE WALL PANELS TO THE GENERAL PUBLIC & CONTRACTORS

2. BE OUR STATE REPRESENTATIVE

Concrete Wall Panels are a 12 sq. ft. specialty panel custom designed by Bryan Gauthier of SBC.  Currently available are 9 different custom designs.  Each program begins with the Veneer Stone Pattern.  Once the process is fully learned and mastered contractors can purchase the other additional 8 mold patterns to add to their showcase.

All Contractors, Manufacturers & State Reps will be trained by SBC and will learn the varieties of specialty mixes to produce the panels, produce the sister molds and learn the fastest install options that will be used for residential and commercial jobs.  Each 12 sq. ft. panel cost less than $6.00 per 12 sq. ft. panel in total material costs.

Contractors are selling the jobs currently at a starting fee of $15.00 per sq. ft. installed.  Some are selling for as high as $35.00 sq. ft. installed.  Installation times are 3 to 5 days depending on the size of the job. 

Core Points of Each OPPORTUNITY

BECOME A DISTRIBUTOR OR STATE REP.

OPPORTUNITY 1 - DISTRIBUTOR

Become a Contracting Manufacturer of SBC

Investment cost - $15,000 = Payment Plan Available
Minimum Requirement to get started $5,000 Deposit -(Secures your area)

In addition to Exclusive Rights to their territory (100,000 min. in population up to 250,000) You can focus on bigger daily production amounts and fulfill orders to general public and contractors that are in your area of Exclusive Rights. (there will be a minimum order of $1,000 when fulfilling orders to general public)

All sales are directed to you. You are required to provide a monthly report of all your sales to your State Rep of SBC or SBC. On a monthly basis you are required to pay State Rep. of SBC or SBC 15% of all Sales which include contracted jobs of you manufacturing and installing panels and sales of panels to the general public as a product.

The Big Picture of Phase two, low scenario example:

Just one order from general public to self install 1,000 square feet = 84 panels at a cost of $12.50 per square foot purchased from state rep or SBC.

You are paid by state rep or SBC 25% (new changes dropping this to 15%) less than the retail price to fulfill and deliver order of 84 panels at a cost of $10.00 per square foot. 84 Panels x 12 square feet each = 1,008 square feet x $10.00 per foot = $10,080

Call Bryan for new scenarios that are even better than this!

Hot tip for moving whatever you can manufacture per day: In Phoenix, Arizona it cost about $900 to have a local video production company to make a ready made 30 second commercial. We can air it on any major channel locally for a cost of $15 per each 30 second airing. A $2,000 budget will get you a total of at least 133 airings in a month. 4 to 5 times a day, everyday of the month. (later, 7 to 10 times a day per each major channel will create more than most will need or want in sales)

Realistic daily production and sales profit examples with a three person team:

40 panels a day at $10 per square foot = $4,800 daily sales,
3 times a week = $14,400,
per month = $57,600,
5 times a week = $24,000,
per month = $96,000

100 a day using SBC home made Shot Crete Sprayer:
100 panels a day at $10 per square foot = $12,000 daily sales,
3 times a week = $36,000,
per month = $144,000,
5 times a week = $60,000,
per month = $240,000 (30 second commercials 7 to 10 times a day on 3 to 5 most popular channels)

Top 5 most popular channels: 1. Fox 2. CNN 3. NBC 4. Fox News Channel 5. ABC
5 major channels @ 10 times per day each = 50 x 5 = 250 - 30 second airings per day x $15 = $3,750 total commercial campaign per day. 30 days = $112,500. Over exaggerate airing time then reduce 75% in the months following. $28,125 max per month and keep in mind these are way above and beyond for large cities like Phoenix and surrounding cities. (Perspective)

OPPORTUNITY 2 - STATE REP.

UNDER STATE REP., YOU HAVE 2 CHOICES:

CHOICE A - This is for International State Reps Only! A one time Investment fee of $47,500

100% of all profits selling distributorships at $15,000 to $25,000 per territory. IS YOURS! In Open states with this opportunity the best focus will be to advertise in every major paper under opportunities stating the investment amount required and the realistic profit gains expected.

The limited amount of States being released by SBC with this amount of benefits will only be 10 total. (Those looking for a Profitable Franchise will not find a better ongoing profit margin) The benefit is that this has all the benefits of buying a franchise, but with out any of the strings attached.

The initial investment can pay for itself within 5 sales @ $15,000 and the bigger long term picture is the success of those 5+ will be huge per month on just residuals attained monthly from their 15% of sales being passed onto to you.

Realistic profit and residual examples:
10 contractor/manufacturers per state = $150,000 to $250,000 in initial start up profits

Each contractor/manufacturer, low scenario of production per month:
40 panels a day at $10 per square foot = $4,800 daily sales,
3 times a week = $14,400,
per month = $57,600 + 15% profit to you = $8190.00 x 10 contractor/manufacturers = $81,900.00+ a month, $982,800 per year.
5 times a week = $24,000,
per month = $96,000 + 15% profit to you = $14,400 x 10 contractor/manufacturers = $144,000+ a month, $1,728,000 per year.

100 a day using SBC home made Shot Crete Sprayer:
100 panels a day at $10 per square foot = $12,000 daily sales,
3 times a week = $36,000,
per month = $144,000 + 15% profit to you = $21,600 x 10 contractor/manufacturers = $216,000 a month, $2,592,000 per year.
5 times a week = $60,000,
per month = $240,000 + 15% profit to you = $36,000 x 10 contractor/manufacturers = $360,000 a month, $4,320,000 per year.

CHOICE B) Initial Investment fee of $25,000

With This Option, out of your ongoing 15% Commissions you pass on 7% to SBC of all sales (for both Contracted Jobs & Distributor Sales through yourself or your Distributors under you as the State Rep.)

GREAT part of this option is the Partnership you have with Bryan, owner of SBC ! Bryan's commitment level as a partner is far from idle! He will take yearly advancements serious to keep the partnership profiting.

For those that see the potential & are serious, call Bryan, there's always more details he can share with you.

U.S. 800-324-1719 ext. 201

International 1-602-741-8322

 

SEE ALL SBC MIP WINNING PRODUCTS

 

LEARN MORE ABOUT THESE WINNING PRODUCTS ...

Home2012 TRAINING DATES Decorative Concrete Training DVD Basic Training Contact Us Photo Gallery Email Us About Us Terms & Conditions Decorative Concrete Articles SBC Links & Resources SBC Newsletter Student Testimonies Customer Testimonies Link To Us Vertical Texture Rollers Stamps & Molds Site Map SBC Store

800-324-1719

© 1998 - 2012 Something Better Company, LLC All Rights Reserved